Spring Tier Tray with Clear Scraps

Hello Crafty Friends - I am here with a fun project featuring the Clear Scraps DIY Tier Tray and the Clear Scraps Mini Pallet Flower.

Supplies Used:

Clear Scraps: DIY Tier Tray

Clear Scraps: Mini Pallet Flower

Plaid Paints: White, King's Gold and Aquamarine

Water

Wood Glue

 Masking Tape

Papertowels

Mircofiber Towel

Paint Brush

Sandpaper & Sanding Block

Magnet Sheet

Crinkle Circle Die

Glue Stick & Hot Glue Tool

Let's get started!

I start by gathering the supplies for the Clear Scraps: Mini Pallet Flower.

I die cut the circle from making tape.

I  adhere the die cut making tape circle to the center of the Clear Scraps: Mini Pallet Flower. 

Pressing it firmly onto the center.

I paint the entire Clear Scraps: Mini Pallet Flower white.

I remove the making tape and paint the center with the golden paint.

I set the Clear Scraps: Mini Pallet Flower to the side to dry.

Next, I gather the pieces of the Clear Scraps: DIY Tier Tray

I start by painting the sides of the Clear Scraps: DIY Tier Tray with the Aquamarine paint that has been watered down a bit. I quick wipe off the paint with a papertowel creating a wash affect on the pieces. I repeat the process on all the pieces of the Clear Scraps: DIY Tier Tray

Then, once the pieces are dry(they dry quickly with the wash effect) I sand the edges of  all the pieces. This gives the pieces a rustic look. Which goes perfectly with my kitchen. 

I repeat this on all the pieces even the flower.

Now, it's time to assemble the Clear Scraps: DIY Tier Tray. I put a bit of wood glue on the tab of the bottom tier and the sides of the pieces. I insert them into the slots. I tape the sides using the palm of my hand to make sure they are completely inserted. Repeat for the top tier.

I glue the little strips or edges of each tier in place.

I use a bit of making tape to hold them until the glue dries

(because I do not own mini wood clamps).

Once the tier tray is dry I add strip of magnet sheet to the back of the flower and to the right hand corner of the bottom tier. I adhered the magnet with a bit of hot glue.

This will be where I will change the decorative piece with the other fabulous pieces of wood shapes that Clear Scraps has to offer for the seasons and holidays.

Now, the Clear Scraps: DIY Tier Tray is done!

Thank you for stopping by the blog today. I hope you found some inspiration!

I hope you give some of our amazing Clear Scraps products like: DIY Tier Tray

 

Follow us for more inspiration on social media:

Clear Scraps Facebook

Clear Scraps Instagram

Clear Scraps Pinterest