Wednesday, January 21, 2026

Spring Tier Tray with Clear Scraps

Hello Crafty Friends - I am here with a fun project featuring the Clear Scraps DIY Tier Tray and the Clear Scraps Mini Pallet Flower.


Supplies Used:
Plaid Paints: White, King's Gold and Aquamarine
Water
Wood Glue
 Masking Tape
Papertowels
Mircofiber Towel
Paint Brush
Sandpaper & Sanding Block
Magnet Sheet
Crinkle Circle Die
Glue Stick & Hot Glue Tool



Let's get started!

I start by gathering the supplies for the Clear Scraps: Mini Pallet Flower.

I die cut the circle from making tape.

I  adhere the die cut making tape circle to the center of the Clear Scraps: Mini Pallet Flower
Pressing it firmly onto the center.

I paint the entire Clear Scraps: Mini Pallet Flower white.

I remove the making tape and paint the center with the golden paint.
I set the Clear Scraps: Mini Pallet Flower to the side to dry.


Next, I gather the pieces of the Clear Scraps: DIY Tier Tray

I start by painting the sides of the Clear Scraps: DIY Tier Tray with the Aquamarine paint that has been watered down a bit. I quick wipe off the paint with a papertowel creating a wash affect on the pieces. I repeat the process on all the pieces of the Clear Scraps: DIY Tier Tray



Then, once the pieces are dry(they dry quickly with the wash effect) I sand the edges of  all the pieces. This gives the pieces a rustic look. Which goes perfectly with my kitchen. 

I repeat this on all the pieces even the flower.

Now, it's time to assemble the Clear Scraps: DIY Tier Tray. I put a bit of wood glue on the tab of the bottom tier and the sides of the pieces. I insert them into the slots. I tape the sides using the palm of my hand to make sure they are completely inserted. Repeat for the top tier.

I glue the little strips or edges of each tier in place.

I use a bit of making tape to hold them until the glue dries
(because I do not own mini wood clamps).

Once the tier tray is dry I add strip of magnet sheet to the back of the flower and to the right hand corner of the bottom tier. I adhered the magnet with a bit of hot glue.



This will be where I will change the decorative piece with the other fabulous pieces of wood shapes that Clear Scraps has to offer for the seasons and holidays.

Now, the Clear Scraps: DIY Tier Tray is done!




Thank you for stopping by the blog today. I hope you found some inspiration!

I hope you give some of our amazing Clear Scraps products like: DIY Tier Tray

 
Follow us for more inspiration on social media:















Saturday, January 17, 2026

You Are My Favorite Chapter Card with Die Cut Divas

 Hello Crafty Friends - I am here with a reading theme card featuring the My Favorite Chapter digi from Sunbird Spark for the Die Cut Divas challenge.  This momnth's challenge is use a NEW Crafty Item.

My new crafty items are the Sunbird Spark Digi and Stellar Inks

This year we're welcoming a new sponsor Sunbird Spark.

Sunbird Spark is a Vancouver (Canada) based paper craft supply company and the creator of the patented Stencils 360°™ stenciling tool. Formerly known as Penguin Palace, the brand is known for its innovative tools, high-quality photopolymer stamps, and its specially curated ink collection inspired by color psychology. Sunbird Spark is dedicated to inspiring creativity through bold color, versatile designs, and a passion for exceptional customer care, helping makers of all levels craft with confidence and joy.



Our challenge theme this month is: Use New Crafty Item

Sunbird Spark is giving a $20 CAD gift card as the prize.

Wednesday, January 14, 2026

Floral Card with Pajama Crafter Stamps

 Today, I am sharing this floral encouragement card featuring the Build A Flower- Flowers For Beautiful You from Pajama Crafter Stamps. This beautiful layers set is perfect for any occasion.  I pair it with an embossing folder to add some texture. I added a bit of splatter with Solar Spray, Stellar Inks in Clear Skies and Midnight Snack.



Supplies Used:

It's on sale!!

Solar Spray: Neptune
 Stellar Inks: Clear Skies, & Midnight Snack

Friday, January 9, 2026

Berry Sweet Strawberry-Themed Card 🍓 with Simon Hurley Creates

Hello Crafty Friends - I am here with a fun Strawberry themed card featuring New products from Simon Hurley Create. I am honored to be asked to create some projects for Simon Hurley and Ranger.


I created a video tutorial over on my YT channel

Supplies Used:

Simon Hurley Creates: Berry Best Stamp Set
Simon Hurley Creates: Berry Best Coordinating Dies
Simon Hurley Creates: Dotted Leaves Cling Rubber Background Stamp
Stellar Inks: Fore!, Later Gator, Stupid Cupid, Love Bomb, & Black Widow
Lunar Paste: Minty Fresh
Simon Hurley Create Cardstock: Stark White 110lb
Bearly Art Glue
Foam Tabs
Tiny Red Gems

Thank you for stopping by the blog today. I hope you found some inspiration!

Thursday, January 8, 2026

Happy Birthday Gift Card Holder with Dare 2B Artzy

 Hello Crafty Friends - I am sharing this fun birthday gift card holder featuring Dare 2B Artzy Pull & Reveal Gift Card Holder, the Create-A-Cupcake Diet Set and the Tall Celebration Stamp Set.


Supplies Used:
The Following are from Dare 2B Artzy
* Pull & Reveal Gift Card Holder
* Create-A-Cupcake Diet Set
* Tall Celebration Stamp Set
* Tall Celebration Coordinating Die Set
* Summer Breeze 6x6 Paper Pack

Thank you for stopping by the blog today. I hope you found some inspiration!

Wednesday, January 7, 2026

Lucky Shaker Card with Clesr Scraps

 Hello Crafty Friends - I am here with a fun shaker card featuring
 the Clear Scraps Mini Shaker Shamrock .


Supplies Used:
Plaid Paints: Kelly Green & Metallic Emerald
Cardstock: Dark Green, Medium Green, & White
Shimmer Cardstock: Gold
Shamrock Pattern Paper
White Cardbase
Pretty Pink Posh Die: Lucky
Dare 2B Artzy Dies: Rectangle Framelits
Shaker Bits
Bearly Art Glue
Tools: Paint Brush, & Paper Towels


Let's get Started.

I start by painting the back and front of the Clear Scraps Mini Shaker Shamrock .
  Then, set them aside to dry.


Next, I adhere the two inner pieces together. I place them under a heavy tile to dry.



While the pieces of the Clear Scraps Mini Shaker Shamrock  dry I adhere the pieces of the die cut sentiment together. I die cut 2 from white cardstock and 2 from shimmer cardstock. I adhere them together to make a thick chipboard piece. Then, I adhere it to the back piece.


Next, I gathered all the cardstock, pattern paper and card base together and adhered them.

Now that my Clear Scraps Mini Shaker Shamrock  pieces are dry it's time to put the shaker together.

I start by adhering the acetate piece to the back of the front piece. 
Set it aside under the heavy tile for a bit.

Next, I adhere the inner pieces to the back of the Clear Scraps Mini Shaker Shamrock  and clean up any adhesive that is showing. I also put a bit of anti-static powder in the shaker(not shown but a tip).

Next, I fill the back piece with the shaker bits and adhere the top of the
 Clear Scraps Mini Shaker Shamrock  and place it under a heavy tile for about a minute. 

Once the shaker is dry it's time to add it the card.

I adhere the Clear Scraps Mini Shaker Shamrock  to the card.

I adhere the sentiment on top of the Clear Scraps Mini Shaker Shamrock. I placed it towards the bottom of the shaker.

Finally, I add a few shaker bits and a clay two-tone heart to the card.

The card is now complete!








Tuesday, January 6, 2026

Owl Always Be Your Friend Card with Pixi Dust Designs

 Hello Crafty Friends today I have a
friendship card featuring the Owl Always Be Your Friend Die Set from Pixi Dust Designs. This card is sparkly with a glitter paste background and layers.



I have a video tutorial on my YT channel



Supplies Used: Pixi Dust Designs: Owl Always Be Your Friend Pun Die Set Cardstock: Red, Blue, Light Gray, Dark Gray, Black & White Tim Holtz Stencil Hocus Pocus Distress Ink: Hickory Smoke VersaFine Ink Onyx Black Brutus Monroe Glitter Glaze in Silver OLO Markers: R1.7 & YO2.5 Bearly Art Glue Foam Tabs

Thank you for stopping by the blog today. I hope you found some inspiration!