Little Wings Creates: Bouquet of Flowers in a Vase with Rinea Foil Paper

I got the Beer Glass cut file from Simply Crafty SVGs. Uploaded it into my Brother Scan N Cut. I cut the base of my vase out of plain white cardstock. * Note I only cut the glass, not the lid I also cut the outer panels of the glass out Rinea: Starstruck Arctic/Arctic Foil Paper.

Next, I ran the Rinea: Starstruck Artic/Artic Foil Paper glass panels through Xyron Inc. Creative Station Lite. along with the glass bottom.

Assembly:

I started by gluing one of the tabs of the vase and continued down the panel.

*Note: Simply Crafty SVGs has YT videos and PDF for assembly.

I did this to all 10 panels to create the base of the vase.

To close the bottom of the vase I adhered the decagon shape to the bottom tabs of the vase.

Then, I applied the front panels of Rinea: Starstruck Artic/Artic Foil Paper to the vase.

The Rinea: Starstruck Arctic/Arctic Foil Paper with Rinea: Glossy Marigold/ GoldFoil Paper

I die cut the flower parts from Rinea: Starstruck Arctic/Arctic Foil Paper and

Rinea: Glossy Marigold/ GoldFoil Paper along with a leaf from

Rinea: Starstruck Emerald/Emerald Foil Paper

Next, I cut a length of craft wire into about 20 inches. I then folded the wire in half. Added a bit of washi tape to the loop part of the wire. I take the center of the flower (comb/fringe) add a bit of adhesive to the little tab side and start rolling the center around the wire. Making sure to add a bit of adhesive along the way.

Then, I adhered the petals (they are 3 attach little one) to the center of the flower. I then continue with the single petals medium, followed by the larger ones. I then, wrap the green washi to the wire of the flower to create a stem. I added the leaf along the way.

The Hyacinths

I die cut the flower parts from Rinea: Glossy Blush/ Gold Foil Paper,

Rinea: Starstruck Turquoise/Turquoise Foil Paper (2 pieces for each flower),

Rinea Glossy Emerald/ Gold Foil Paper (1 piece for each flower),

and Rinea: Starstruck Jade/Jade Foil Paper (2 pieces for each flower),

I simply followed the easy directions on the back of the

Rinea 3D Hyacinth Die Set

Assembly:

I cut pieces of Rinea Glossy Emerald/ Gold Foil Paper into 2 inches wide and 8 inches long. To create the stem for the Hyacinths. I placed a skewer at the corner of

the Rinea Glossy Emerald/ Gold Foil Paper and started rolling the paper added a few drops of adhesive along the way.

Next, the flowers, I adhered the two Rinea: Glossy Blush/ Gold Foil Paper. Then, I use the skewer to roll the petals of the Hyacinths (making sure the curls are facing out). Once all the petals are curled into place. I adhered the petals to the stem by applying a bit of adhesive the inside of the base of the petals to the stem. Making sure to add a bit of adhesive along the way so the petals are secure. I follow the petals with the Rinea: Starstruck Jade/Jade Foil Paper leaves. *Note I repeated this process for each Hyacinth created.

Blush and Marigold Flowers

I die cut the petals for all the flowers I created 2 Blush Flowers and 1 Marigold Flower.

I did them all the same way. I used Rinea: Starstruck Blush/Blush Foil Paper,

Rinea: Starstruck Fuschia/Fuschia Foil Paper, Rinea: Starstruck Jade/Jade Foil Paper

and Rinea: Starstruck Emerald/Emerald Foil Paper for the Blush Flowers.

I used Rinea: Glossy Marigold/ GoldFoil Paper,

Rinea: Starstruck Marigold/Marigold Foil Paper and Rinea Glossy Emerald/ Gold Foil Paper for the Marigold flower. Along with some crafty wire, craft beads, sequins, and washi tape.

Assembly:

I start by adhering the petals in the configuration I want for each flower. Next. I slide one bead onto the craft wire (Trimmed about 20 inches). I twist the wire to secure the bead in place; I then slide the sequin on to the craft wire. They will be the centers of the flowers. Then, I slide the centers into the opening in the petals of the flowers. I add a bit of adhesive to the back of the sequins to help secure the centers in place. I then, wrap the wires with the washi tape. Making sure to add a leaf along the way.

Tiny Violet Flowers

I die cut the petals for all the flowers - I used Rinea: Glossy Lavender/ Gold Foil Paper

Rinea: Glossy Violet/ Gold Foil Paper, and Rinea: Starstruck Jade/Jade Foil Paper for all the flowers. along with tiny seed beads, craft wire, and washi tape.

Assembly:

I adhered the layers of the flowers together. I created a small hole to the center of the petals of all the flowers for the stems. To create the stem I did the same as before. I slid the bead to the wire folded it in half and gave a bit of a twist. Insert it through the flower petals and wrapped washi tape to the wire starting at the base of the flower petals. *Note: for this flower, I wrapped each flower individually along with the leaf. Next, I wrap two of the flowers, then add the last flower and leaf. I continue to wrap the stem. This created a multi-flower stem.